G-Penny 1.5KW ER11 D65 110V/220V Water cooled spindle motor 400hz 24000rpm 4pcs 7series bearings for cnc router

Size: 65 x 209mm (Middle body diameter:65mm;Length:209mm)

Speed Ways: Through 3-phase output inverter and adjust the inverter frequency to change the spindle speed.

Cooling: Water cooling

Power Interface: Optional H17-4 pins waterproof air plug. The air plug marked "1 ","2"," 3"," 4", "1 ","2 ","3" were connected to inverter (U, V, W), 4 connected inverter ground. (Pay attention! our spindle "4" connecting to GND,promised personal safety!!)

Power: 1.5kw (1HP=0.735kw)

Voltage: 110v/220vAC

Frequency: 0-400Hz

Speed: 0-24000rpm

Runout Off: 0.01mm

4 pcs Fully sealed P4 angular contact ball bearings

Water Cooling ER11 collet chunk

Grease Lubrication

Main Application: Engrave for wood,bamboo,normal PCB,PVC,PMMA,plastic,duotone board(ABS)and etc nonmetal, also can engrave on gold,silver,copper, aluminium,Pb etc soft metal surface working.

(Please pay more attention, this is wood working spindle, only can used for wood working and aluminum working,please don't use it for steel. If you need steel working,please check the metal spindle,thank you!)