G-Penny 1.5KW ER16 D65 110V/220V Water cooled spindle motor for CNC Wood/ Aluminum Working

Basic parameter:

Size: 65x210mm(Middle body diameter:65mm;Length:210mm)

Speed Ways: Through 3-phase output inverter and adjust the inverter frequency to change the spindle speed.

Cooling: Water cooling

Power Interface:Optional H17-4 pins waterproof air plug. The air plug marked "1 ","2"," 3"," 4", "1 ","2 ","3" were connected to inverter (U, V, W), 4 connected inverter ground.

Power: 1.5kw

Voltage: 220v/380v

Current: 7A/4A

Frequency: 0-400Hz

Speed: 0-24000rpm

Runout Off: Less than 0.01mm

Diameter(mm): 65

Bearing Type:2 x 7004 P4 DT & 2 x 7000 P4 DT

4pcs fully sealed angular contact bearings

Collet: ER16
Clip Knifediameter:1-10mm
Water Cooling ER16 collet chunk
Grease Lubrication

Main Application: Engrave for wood,bamboo,normal PCB,PVC,PMMA,plastic,duotone board(ABS)and etc nonmetal, also can engrave on gold,silver,copper, aluminium,Pb etc soft metal surface working.(Please pay more attention, this is wood working spindle, only can used for wood working and aluminum working,please don't use it for steel. If you need steel working,please check the metal spindle,thank you!)